IoT-Based Energy Consumption Analysis of Electric Vehicles: The Effect of VESC Motor Current Limits
DOI:
https://doi.org/10.22373/jgf76473Abstract
This study presents an IoT-based battery monitoring system and analyzes the effect of the VESC motor current limit on battery current and energy consumption. The research focuses on an electric vehicle prototype developed by the Electric Car Research Center (ECRC) at the Faculty of Engineering, Universitas Muhammadiyah Surakarta. The system integrates an ESP32-S3, PZEM-017 sensor, Neo-7M GPS, and Firebase database for real-time monitoring. Experiments were conducted at five current limits 10-30 A with three replications. Results show that increasing the current limit from 10 A to 30 A increased average battery current from 1.30 A to 3.53 A (F(4,10) = 285.47, p < 0.001, R² = 0.991), energy consumption from 6.54 Wh to 12.90 Wh (F(4,10) = 298.66, p < 0.001, R² = 0.992), and torque from 3.60 Nm to 5.43 Nm (F(4,10) = 142.35, p < 0.001, R² = 0.983), but decreased energy efficiency from 152.90 to 77.52 km/kWh. The expanded uncertainties for all measurements remained below 1.5%, confirming high data precision. These findings quantify the performance-efficiency trade-off, providing a basis for optimizing current limit settings in energy-efficient electric vehicles.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Fahri Ardianto, Agus Ulinuha

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish in CIRCUIT: Jurnal Ilmiah Pendidikan Teknik Elektro agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work licensed under a Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0) that allows others to share and adapt the work with an acknowledgement of the authorship and initial publication in this journal
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work. (See The Effect of Open Acces)
