Smart Mosque Prototype Based on IoT for Electrical Energy Savings Using LDR, DHT11 and PIR Sensors
DOI:
https://doi.org/10.22373/k3526207Abstract
This study examines the importance of energy efficiency in mosques in Indonesia as part of national sustainability initiatives. This research aims to develop and evaluate the performance of an IoT-based automation system designed to optimize electricity consumption. A prototype was developed using a NodeMCU ESP32 microcontroller integrated with light (LDR), temperature (DHT11), and motion (PIR) sensors. The ThingSpeak platform was utilized for real-time energy consumption monitoring and system control. Black-box functional testing indicates that the multi-sensor adaptive control mechanism operates with a 100% success rate. A comparison of energy consumption was conducted between a manual operational scenario and the automated system. Measurements show that energy consumption under manual operation reaches approximately 0.475 kWh per day. Following the implementation of the automated system, the average daily operational duration of the devices was reduced to approximately 25 minutes, resulting in a decrease in energy consumption to about 0.0396 kWh. Consequently, the system yields an estimated daily energy saving of nearly 92%. These findings demonstrate that IoT-based control has the potential to support energy management in mosques, in alignment with sustainable Green Building principles.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Mursyidin, Khairan AR, Utari Rahmatillah, Husnullizam, Uweis Karni Abdullah

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish in CIRCUIT: Jurnal Ilmiah Pendidikan Teknik Elektro agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work licensed under a Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0) that allows others to share and adapt the work with an acknowledgement of the authorship and initial publication in this journal
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work. (See The Effect of Open Acces)
