Design and Implementation of a Portable Air Quality Monitoring Device Using Nova Fitness SDS011 Sensor Technology in Urban Areas
DOI:
https://doi.org/10.22373/p-jpft.v12i2.32124Keywords:
Air Quality; Device Design; Nova Fitness SDSO11 Sensor;Abstract
This study presents the design and implementation of a portable air-quality monitoring device based on the Nova Fitness SDS011 sensor to measure PM2.5 concentrations. The system integrates a microcontroller-based processing unit with real-time data display and audio warning features. Device performance was evaluated by calibrating against a reference instrument (BAM 1020, BMKG), yielding an average measurement error of 2.43%. In addition, validation by media experts indicated a high feasibility level of 95%, confirming the device’s suitability for practical use. Field testing conducted in several urban locations revealed significant variations in PM2.5 concentration, influenced by factors such as traffic density, industrial activity, and population distribution. The results demonstrate that the proposed device provides a reliable, low-cost, and portable solution for real-time PM2.5 monitoring in urban environments. This study contributes to the development of easy-to-use tools for monitoring air quality in support of environmental awareness and educational applications.
References
AirVisual Research Team. (2025). Perbandingan pengukuran PM2.5 menggunakan sensor AirVisual (AV) dan beta attenuation monitor (BAM): Korelasi harian 0.96, per jam 0.83. Environmental Monitoring and Assessment, 197(4), Pasal 89. https://doi.org/10.1007/s10661-025-08912-3
Badura, B., Batycka, K., & Pawlak, M. (2018). Calibration of low-cost particulate matter sensors: Model development, laboratory evaluation, and field deployment. Atmospheric Environment, 15(3), 210–225. https://doi.org/10.1016/j.atmosenv.2018.03.005
Badan Meteorologi, Klimatologi, dan Geofisika. (2023). Peraturan BMKG No. 6 Tahun 2023 tentang penyediaan dan penyebaran informasi kualitas udara. BMKG.
Badan Meteorologi, Klimatologi, dan Geofisika. (2025). Informasi kualitas udara Indonesia. Badan Meteorologi, Klimatologi, dan Geofisika. https://iklim.bmkg.go.id/id/kualitas-udara-indonesia/
Badan Standardisasi Nasional. (2023). Udara ambien – Uji kinerja alat pemantauan kualitas udara yang menggunakan sensor berbiaya rendah (SNI 9178:2023). Badan Standardisasi Nasional. https://pestabsn.bsn.go.id/produk/detail/14487-sni91782023
Budde, M., Schwarz, A. D., Müller, T., Laquai, B., Streibl, N., Schindler, G., Köpke, M., Riedel, T., Dittler, A., & Beigl, M. (2018). Suitability of the low-cost SDS011 particle sensor for monitoring urban air quality (TECO Publication). TECO. https://www.teco.edu/~budde/publications/dust2018_budde_sds011.pdf
Bulot, F. M. J., Russell, Z. J., Johnston, D., & Johnston, P. R. (2023). Very low-cost, Internet of Things (IoT) air quality monitoring platform: Accessibility gaps in public data integration. Atmospheric Environment, 298, Pasal 119612. https://doi.org/10.1016/j.atmosenv.2023.119612
California Air Resources Board. (2019). Standard operating procedures for the operation of Met One Instruments beta attenuation mass monitor (BAM-1020) (ed. ke-2).
Chen, L., Zhang, Y., & Wang, M. (2022). Performance evaluation of low-cost optical particle sensors for PM2.5 monitoring in urban environments. Atmospheric Environment, 15(3), 210–225. https://doi.org/10.1016/j.atmosenv.2022.03.005
Fadilla, A. R., & Wulandari, P. A. (2023). Literature review analisis data kualitatif: Tahap pengumpulan data. Mitita Jurnal Penelitian, 1(3), 34–46.
Herowati, L. F., & Azizah, L. F. (2022). Model pengembangan 4D (Define, Design, Develop, dan Disseminate) dalam pembelajaran pendidikan Islam. Journal of Islamic Education Engineering, 4(1), 1–15. https://doi.org/10.55438/jiee.v4i1.135
Inzagi, F. M., Amirudin, M., & Winasis, G. (2025). Sistem monitoring cuaca berbasis IoT dengan integrasi mikrokontroler ESP32 dan notifikasi real-time. Jurnal Teknik Elektro dan Informatika, 4(2), 112–125. https://doi.org/10.26877/aqnxq374
Jayaratne, R., Ling, X., & Morawska, L. (2021). An evaluation of the performance of a low-cost PM2.5 sensor under variable indoor and outdoor conditions. Atmospheric Environment, 245, Pasal 118019. https://doi.org/10.1016/j.atmosenv.2020.118019
Kelly, F. J., & Fussell, J. C. (2022). Air pollution and public health: Emerging hazards and improved understanding of risk. Environmental Science and Pollution Research, 29(1), 1–18. https://doi.org/10.1007/s11356-021-16700-1
Kementerian Lingkungan Hidup dan Kehutanan. (2024). Laporan kinerja Direktorat Jenderal Pengendalian Pencemaran dan Kerusakan Lingkungan tahun 2024. Ditjen PPKL, KLHK. https://ppkl.menlhk.go.id/
Kuula, J., Niemi, J. V., Karjalainen, P., Kuokka, M., Tukiainen, S., Sofiev, M., Asmi, E., Kousa, A., & Timonen, H. (2021). Review of the newly developed, mobile optical sensors for real-time measurement of atmospheric particulate matter concentration. Sensors, 21(8), Pasal 2653. https://doi.org/10.3390/s21082653
LCDI Indonesia. (2024). Dampak polusi udara dari transportasi terhadap kesehatan di Indonesia. Low Carbon Development Initiative Indonesia. https://lcdi-indonesia.id/wp-content/uploads/2024/03/1-IND-Policy-Note-2023.10.16.pdf
Liu, C., Chen, R., Sera, F., Vicedo-Cabrera, A. M., et al. (2022). The impact of fine particulate matter 2.5 on the cardiovascular system. Frontiers in Public Health, 10, Pasal 876543. https://pmc.ncbi.nlm.nih.gov/articles/PMC9370264/
Nothhelfer, C., Robinson, A. D., & Easterling, S. (2023). Low-cost sensor networks for air quality monitoring: A review of deployment strategies and validation methods. Journal of Environmental Monitoring, 25(8), 1450–1468. https://doi.org/10.1039/jem2023.08.002
Nugroho, A., Pratiwi, R., & Santoso, B. (2025). Prediksi konsentrasi PM2.5 alat low-cost sensor menggunakan regresi berganda dengan optimasi gradient descent terhadap BAM 1020. Prosiding Seminar Nasional Statistika, 12(1), 323–335.
Ramdhan, M. (2021). Metode penelitian. Cipta Media Nusantara.
Santoso, D. H., Santosa, S. J., & Sekaranom, A. B. (2025). Low-cost sensor based on Internet of Things for PM2.5 air quality monitoring. Indonesian Journal of Geography, 57(2), 145–156. https://doi.org/10.22146/ijg.10415
Sari, M. I., & Arifin, M. (2024). Particulate matter (PM) levels and associated health risks among preschool children in urban areas. Environmental Research and Technology, 7(2), 89–97. https://doi.org/10.47807/ert.1429916
Sari, N. P., & Hasibuan, R. (2025). Pemetaan kualitas udara Kota Medan pada tahun 2025 dengan pendekatan sistem informasi geografis. Jurnal Ilmiah Ilmu Komputer dan Informatika Nusantara, 3(1), 45–58. https://doi.org/10.5743/jiic.v3i1.5743
Sari, N. P., & Putra, A. S. (2024). Rancang bangun sistem monitoring parameter lingkungan berbasis IoT dengan mikrokontroler ESP32. Inductor: Jurnal Teknik Elektro, 6(1), 34–45.
Smith, J., & Lee, K. (2022). Time-constrained 3D modification framework (specification–design–development) for rapid prototyping environmental sensors. Journal of Engineering Design, 33(4), 278–295. https://doi.org/10.1080/09544828.2022.2045678
Thiagarajan, V. S., Semel, D. J., & Semel, A. M. (1975). Model 4D for teacher training. University of California.
Wang, C., & Cao, J. (2024). Air pollution, health status and public awareness of environmental problems in China. Scientific Reports, 14, Pasal 19861. https://doi.org/10.1038/s41598-024-69992-2
WRI Indonesia. (2024). Pengertian kualitas udara Jakarta: Tiga analisis dari paruh pertama tahun 2024. WRI Indonesia.
Wulandari, S., & Satria, B. (2021). Rancang bangun alat pendeteksi warna menggunakan Arduino Uno berbasis IoT (Internet of Things). Paradigma - Jurnal Komputer dan Kependidikan, 20(1), 45–58.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Naza Fahrul Sirait, Sri Nengsih

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with Jurnal Phi agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

