Geomechanical Integrity Assessment in Field X of the Telisa Formation Caprock for CO₂ Storage in the Central Sumatra Basin

Authors

  • Hanif Ridho Abdillah Geophysical Engineering Department, Faculty of Industrial Technology, Institut Teknologi Sumatera, Bandar Lampung, Indonesia
  • Aurell Alyya Charissa Geophysical Engineering Department, Faculty of Industrial Technology, Institut Teknologi Sumatera, Bandar Lampung, Indonesia
  • Handoyo Handoyo Geophysical Engineering Department, Faculty of Industrial Technology, Institut Teknologi Sumatera, Bandar Lampung, Indonesia
  • Sondang Samosir Techwin South Betung, Jakarta, Indonesia

DOI:

https://doi.org/10.22373/p-jpft.v12i2.34352

Keywords:

Carbon Capture and Storage (CCS), Caprcok Integrity, Telisa Formation, Brittleness Index, Unconfined Compressive Strength (UCS)

Abstract

Evaluating caprock integrity is essential to ensure the long-term security of geological CO₂ storage. This study assesses the elastic and geomechanical characteristics of the Telisa Formation in the Central Sumatra Basin as a potential caprock for Carbon Capture and Storage (CCS). The analysis integrates well log data from four wells (C-1, H-1, P-1, and T-1), including gamma ray, sonic, density, and predicted shear-wave velocity logs. Elastic parameters such as Young’s Modulus (1–15 GPa) and Poisson’s Ratio (0.3–0.5) were calculated and used to derive the Brittleness Index (0–1.5), while Unconfined Compressive Strength (35–65 MPa) was estimated to evaluate rock strength. The results indicate that the Telisa Formation is predominantly shale-dominated, characterized by high gamma ray values and low porosity, consistent with typical caprock properties. Acoustic Impedance, Young’s Modulus, and UCS generally increase with depth, reflecting progressive compaction and enhanced rock stiffness. Crossplot analyses reveal positive correlations between Acoustic Impedance, Young’s Modulus, Brittleness Index, and UCS, and a negative relationship between Poisson’s Ratio and stiffness-related parameters. Although localized less brittle-to-brittle intervals are identified, particularly in Well P-1, the formation overall exhibits ductile to less brittle behavior. These findings suggest that the Telisa Formation demonstrates favorable mechanical integrity for CO₂ containment, if injection pressures are carefully managed and structural discontinuities are properly evaluated to minimize leakage risk.

References

Altindag, R. (March de 2012). Correlation between P-wave velocity and some mechanical properties for sedimentary rock. The Journal of The Southern African Institute of Mining and Metallurgy, 112(3), 229-237.

Brata, R. A., Mahardi, M. Y., Anis, A. S., & Bahesti, F. (2018). Geomechanics Wellbore Stability Analysis in Successful Drilling of a Challenging HPHT Exploration Well in North Sumatra. Forty-Second Annual Convention & Exhibition (pp. 123-130). Indonesian Petroleum Association.

Castagna, J. P., Batzle, M. L., & Eastwood, R. L. (1985). Relationships between compressional-wave and shear-wave velocities in clastic silicate rocks.

Chadwick, A., Arts, R., Bernstone, C., May, F., Thibeau, S., & Zweigel, P. (2008). Book Best practice for the storage of CO2 in saline aquifers: Observations and guidelines from the SACS and CO2STORE projects (Vol. 14). Nottingham: British Geological Survey.

Chevalier, G., Diamond, L., & Leu, W. (2010). Potential for deep geological sequestration of CO2 in Switzerland: a first appraisal. Swiss J Geosci, 103, 427–455. doi:https://doi.org/10.1007/s00015-010-0030-4

Fawad, M., & Mondol, M. (19 de Agustus de 2021). Method for Estimating Rock Brittleness from Well-Log Data.

Grieser, Bill, & Bray, J. (2007). Identification of production potential in unconventional. Paper presented at the Production and Operations Symposium. Oklahoma City, Oklahoma, U>S>A: Society of Petroleum Engineers. doi:https://doi.org/10.2118/106623-MS

Handoyo, H., Sigalingging, A. S., Nathania, E. S., Astomo, D., Carbonell, R., & Samosir, R. (2025). Study of Porosity and Mechanical-Elastic Properties of the Potential Underground CO2 Storage un-Mined Coal Seams from Well Log Data, South Sumatra Basin, Indonesia. Science and Technology Indonesia, 1, 238–249. doi:https://doi.org/10.26554/sti.2025.10.1.238-249

Heidrick, T. L., & Aulia, K. (1993). A Structural and Tectonic Model of the Coastal Plains Block, Central Sumatra Basin, Indonesia. Indonesian Petroleum Association, 22nd Annual Convention, IPA 93-1.1-179. doi:https://doi.org/10.29118/IPA.572.285.317

Ma, Y. Z., Sobernheim, D., & Garzon, R. J. (2016). Chapter 19 - Glossary for Unconventional Oil and Gas Resource Evaluation and Development. Em Y. Z. Ma, & A. S. Holditch, Unconventional Oil and Gas Resources Handbook (pp. 513-526). Boston: Gulf Professional Publishing. doi:https://doi.org/10.1016/B978-0-12-802238-2.00019-5

Marpaung, L. P., Katz, B. J., & Amlan, M. H. (2010). Brown Shale Characterization in Kiri Trough, Central Sumatra Basin. Lombok: The 39th IAGI Annual Convention and Exhibition.

Mavko, G., Mukerji, T., & Dvorkin, J. (2009). The Rock Physics Handbook: Tools for Seismic Analysis of Porous Media, Second Edition. New York: Cambridge University Press.

Olden, P., Pickup, G., Jin, M., Mackay, E., Hamilton, S., Somerville, J., & Todd, A. (2012). Use of rock mechanics laboratory data in geomechanical modelling to increase confidence in CO2 geological storage. International Journal of Greenhouse Gas Control(11), 304-315.

Perez, A. R., & Marfurt, K. (2014). Mineralogy-based brittleness prediction from surface seismic data: Application to the Barnett Shale. Interpretation, 2(4), T1-T17. doi:https://doi.org/10.1190/INT-2013-0161.1

Rahman, M. J., Fawad, M., Jahren, J., & Mondol, N. H. (2022). Top seal assessment of Drake Formation shales for CO2 storage in the Horda Platform area, offshore Norway. International Journal of Greenhouse Gas Control, 119, 103700. doi:https://doi.org/10.1016/j.ijggc.2022.103700

Ramirez-Ramirez, A., Hagedoorn, S., Kramers, L., Wildenborg, T., & & Hendriks, C. (2010). Screening CO2 storage options in The Netherlands. International Journal of Greenhouse Gas Control, 4(2), 367-380. doi:https://doi.org/10.1016/j.ijggc.2009.10.015

Raza, A., Rezaee, R., Gholami, R., Rasouli, V., Bing, C., Nagarajan, R., & Hamid, M. (2015). Injectivity and quantification of capillary trapping for CO2 storage: A review of influencing parameters. Journal of Natural Gas Science and Engineering, 26, 510-517. doi:https://doi.org/10.1016/j.jngse.2015.06.046

Song, Y., Jun, S., Na, Y., Kim, K., Jang, Y., & Wang, J. (2023). Geomechanical challenges during geological CO2 storage: A review. Chemical Engineering Journal, 456, 140968. doi:https://doi.org/10.1016/j.cej.2022.140968

Subiatmono, P., Buntoro, A., Lukmana, A. H., & David, M. (February de 2022). Brittleness Prediction Using Sonic and Density Logs to Determine Sweet Spot of Brown Shale Reservoir. Journal of Multidisciplinary Engineering Science and Technology (JMEST), 9(2), 15078-15084.

Widita, S. S., & Sapiie, B. (2021). Wellbore Stability on Shale Gas Reservoir with 1D Geomechanical Model, Keluarga Field, Central Sumatra Basin. Joint Convention Bandung (JCB) 2021 (pp. 123-130). Bandung: Ikatan Ahli Geologi Indonesia.

Zoback, M. D. (2007). Reservoir Geomechanics. Cambridge University Press. doi:https://doi.org/10.1017/CBO9780511586477

Downloads

Published

2026-06-15

Issue

Section

Artikel