IOT-BASED CHICKEN EGG HATCHING DESIGN
DOI:
https://doi.org/10.22373/cj.v10i1.33970Keywords:
IoT, Microcontroller ESP32, Censor DHT22, egg incubatorAbstract
This research discusses the design of an Internet of Things (IoT)-based chicken egg incubator aimed at improving efficiency and productivity in the egg hatching process. The device utilizes a DHT22 sensor to measure temperature and humidity inside the incubator and employs an ESP32 microcontroller as the main controller to regulate heaters and fans based on the obtained data. Internet connectivity enables remote monitoring and control through web-based or mobile applications. Test results indicate that the system can maintain temperature and humidity within optimal ranges, specifically between 38ºC to 39ºC for temperature and 72% to 73% for humidity. The implementation of IoT technology in this incubator is expected to enhance egg hatching success rates and reduce operational costs.
Downloads
References
[1] A. Aisyiah, M. Naufal, M. Al-Faruq, dan N. Aini, “Perancangan UI/UX Aplikasi MinaTani Sistem Informasi Agriculture Technology Menggunakan Metode Design Thinking,” 2022.
[2] A. M. Ibrahim dan D. Setiyadi, “Prototype Pengendalian Lampu Dan Ac Jarak Jauh Dengan Jaringan Internet Menggunakan Aplikasi Telegram Berbasis NODEMCU ESP8266,” Infotech: Journal of Technology Information, vol. 7, no. 1, hlm. 27–34, Jun 2021, doi: 10.37365/jti.v7i1.103.
[3] M. Muharam, M. Latif, dan M. Saputra, “Sistem Kendali Jarak Jauh Berbasis Web untuk Sistem Rumah Pintar,” JURNAL NASIONAL TEKNIK ELEKTRO, vol. 7, no. 3, hlm. 203, Okt 2018, doi: 10.25077/jnte.v7n3.502.2018.
[4] N. Nurdiana dan A. Azis, “Perancangan Pengendali Temperatur pada Alat Pengering Makanan,” 2022.
[5] F. Liswardani, I. Rasya Ramadhan, M. A. Shoultan, Y. Pratama, D. Y. Chairunisa, dan R. Siskandar, “Logika Fuzzy Untuk Menentukan Idealitas Suhu Dan Kelembapan Pada Inkubator Telur Ayam”.
[6] A. Maier, A. Sharp, dan Y. Vagapov, “Comparative analysis and practical implementation of the ESP32 microcontroller module for the internet of things,” dalam 2017 Internet Technologies and Applications (ITA), IEEE, Sep 2017, hlm. 143–148. doi: 10.1109/ITECHA.2017.8101926.
[7] N. Cameron, Electronics Projects with the ESP8266 and ESP32. Berkeley, CA: Apress, 2021. doi: 10.1007/978-1-4842-6336-5.
[8] N. Nabilah dkk., “Sistem Monitoring Daya Dan Tegangan Dengan Sensor Wireless Network Esp32 Untuk Optimalisasi Beban AC,” hlm. SNF2016-CIP-73-SNF2016-CIP-78, 2020, doi: 10.21009/0305020115.
[9] X. Bai, “The Application of Internet of Things Technology in Smart Home Design Research,” 2024, hlm. 441–454. doi: 10.1007/978-981-97-1975-4_39.
[10] Rajesh B, Kishvore P.V.P, E. S. Yadav, dan Srinivasan C.R, “A study on onion omega 2 plus IOT device in weather application,” dalam Journal of Advanced Research in Dynamical and Control Systems, 2018.
[11] fitri Puspasari, T. P. Satya, U. Y. Oktiawati, I. Fahrurrozi, dan H. Prisyanti, “Analisis Akurasi Sistem sensor DHT22 berbasis Arduino terhadap Thermohygrometer Standar,” Jurnal Fisika dan Aplikasinya, vol. 16, no. 1, hlm. 40–45, Feb 2020, doi: 10.12962/J24604682.V16I1.5776.
[12] P. C, V. L, P. K, P. S, dan S. Rahiman, “Enhanced IoT Devices with Intelligent System for Object Detection,” dalam 2023 9th International Conference on Smart Structures and Systems (ICSSS), IEEE, Nov 2023, hlm. 1–5. doi: 10.1109/ICSSS58085.2023.10407058.
[13] S. A. Arrahma dan R. Mukhaiyar, “Pengujian Esp32-Cam Berbasis Mikrokontroler ESP32,” vol. 4, no. 1, hlm. 60–66, 2023, doi: 10.24036/jtein.v4i1.347.
[14] J. Oktavianus Matimpas, “Rancang Bangun Sistem Pendeteksi Kebisingan Kenalpot Pada Kendaraan Bermotor Sesuai Aturan Yang Berlaku Berbasis Internet Of Things,” Okt 2022.
[15] H. Yoal, W. Dirgantara, dan S. Subairi, “Monitoring Suhu dan Kelembaban pada Penetas Telur Otomatis Menggunakan Metode Fuzzy Sugeno Berbasis IoT,” Blend Sains Jurnal Teknik, vol. 2, no. 2, hlm. 176–183, Okt 2023, doi: 10.56211/blendsains.v2i2.356.
[16] I. Aditia, R. Ilham, dan J. P. Sembiring, “Penetas Telur Otomatis Berbasis Arduino Dengan Menggunakan Sensor DHT11,” Jurnal Ilmiah Mahasiswa Kendali dan Listrik, vol. 3, no. 1, 2022, doi: 10.33365/jimel.v1i1.
[17] D. Febrina, S. Agustina, dan F. Trisnawati, “Alat Pendeteksi Kelembapan Tanah Dan Penyiram Tanaman Otomatis Berbasis Arduino Uno Menggunakan Soil Moisture Sensor dan RELAY,” vol. 2, no. 2, hlm. 2723–598, 2021, doi: 10.33365/jimel.v1i1.
[18] D. Kusumawati dan B. Angga Wiryanto STMIK Bina Mulia Palu, “Perancangan Bel Sekolah Otomatis Menggunakan Mikrokontroler Avr Atmega 328 Dan Real Time CLOCK DS3231,” vol. 4, 2018.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Mira Maisura, Anjas Fahrurrazi, Firmansyah Firmansyah

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with Cyberspace Journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

















