Pressure comparative analysis study through the Venture pipe with the difference diameter of the pipe.
DOI:
https://doi.org/10.22373/p-jpft.v6i2.9955Keywords:
venturimeter, diameter of cappilaries pipe, flow velocity, fluid altitude, pressure, Bernoulli's equationAbstract
The interesting phenomenon of a fluid flow in the venturimeter that has a different diameter of cappilaries pipe is that of a difference in fluid altitude, the velocity of flow in a pipe, as well as pressure. The study aims to analyze the relationship between the diameter of the capillaries pipe and the flow velocity, the height of the liquid and the pressure. The method in this research is experiment. After experiment, it is continued by calculating some variables using formulas and analyzing them. The conclution of this research is that if the diameter of the capillaries pipe is enlarged, the flow velocity becomes small, the level of the water's surface increases, and the pressure also increases. It corresponds to Bernoulli's equation.References
Abidin, K dan Wagiani, S. 2013. Studi Analisis Perbandingan Kecepatan Aliran Air Melalui Pipa Venturi Dengan Perbedaan Diameter Pipa. Jurnal Dinamika. Vol. 04 (1), 62-78.
Ashari, A. 2017. Tekanan Atmosfer dan SIrkulasi Atmosfer Global. Yogyakarta, UNY.
Ariza, F. 2019. Analisa Numerik Aliran Melalui Venturimeter Dengan Variasi Ukuran Leher Untuk Menentukan Koefisien Kecepatan Dan Penurunan Tekanan. Medan, Program Studi Teknik Mesin Fakultas Teknik Universitas Muhammadiyah Sumatera Utara.
Cahyono, T.T dan Sucahyo, I. 2017. Pengembangan Alat Peraga Tabung Venturi untuk Melatihkan Keterampilan Proses Sains pada Materi Fluida Dinamik. Jurnal Inovasi Pendidikan Fisika. Vol.06 (3), 246-249.
Fatimah, 2021. Pengembangan Modul Fisika Fluida Dinamis Berbasis Pemecahan Masalah. Makassar, Universitas Muhammadiyah Makassar Fakultas Keguruan Dan Ilmu Pendidikan Program Studi Pendidikan Fisika.
Ramadhan,Y, Ramelan, dan Sumbodo, W. 2014. Pengembangan Media Pembelajaran Pengukuran Rugi Aliran Fluida Cair Dalam Pipa Venturi Untuk Menunjang Perkuliahan Mekanika Fluida. Journal of Mechanical Engineering Learning. Vol. 03 (2). 115-124.
Rismaningsih, F, Nurhafsari, A, dan Budiman, J. 2020. Pengembangan Alat Praktikum Venturimeter sebagai Media Penunjang Perkuliahan Fisika Dasar Prodi Teknik Sipil Universitas Islam Syekh-Yusuf. Jurnal Pendidikan dan Aplikasi Industri (UNISTEK). Vol. 07 (1), 28-34.
Sultan, A.D, Rizky, Hidayat, Mulyani, S, Yusuf, W. A. 2020. Analisis Pengaruh Luas Penampang pada Kecepatan Aliran Air dengan Menggunakan Tabung Venturimeter. Jurnal Pendidikan Fisika Universitas Muhammadiyah Makassar. Vol. 08 (1), 94-99.
Widowati, W. 2017. Pengembangan alat praktikum venturimeter untuk pembelajaran materi fluida di SMA/MA kelas XI. Yogyakarta, Program Studi Pendidikan Fisika Fakultas Sains dan Teknologi UIN Sunan Kalijaga.
Downloads
Published
Issue
Section
License
Authors who publish with Jurnal Phi agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).