Articles

Issue cover image
Volume 7, Issue 2 (2023)
SISTEM IDENTIFIKASI MENGGUNAKAN RFID DAN SENSOR INFRARED BERBASIS IOT TERHADAP PENGEMBANGAN KAMPUS PINTAR
Affiliation Details
  • Nazuarsyah Nazuarsyah: Universitas Bina Bangsa Getsempena
  • Ully Muzakir: Universitas Bina Bangsa Getsempena
  • Mukhroji Mukhroji: Universitas Bina Bangsa Getsempena
  • Rossiana Ginting: Universitas Bina Bangsa Getsempena
  • Rizal Munadi: Universitas Syiah Kuala
, Pages: 109-117 , DOI: 10.22373/cj.v7i2.21632

Abstract

This study aims to discuss the development of an identification system tool to unlock doors using Radio Frequency Identification (RFID) and infrared sensors based on the Internet of Things (IoT). This research model is the development of prototyping, consisting of several stages, namely the needs analysis stage through interviews with lecturers and education staff, and conducting literature studies on previous research to get more information on this research. The design and design phase of the tool consists of RFID, infrared sensor, relay, and I2C LCD connected to microcontroller. The solenoid lock is connected directly to the relay as output. The test results on the hardware and software side, the average response time of the device to unlock from outside the room using RFID is 1.13 seconds, while the average response time of the tool to unlock from inside the room using infrared is 0.77 seconds. Thus, the results of this study found the average response time of infrared sensors is faster by 0.09 seconds than RFID. This system can be further developed using other access media such as bluetooth devices that are easily found in smartphones.

5

TOTAL VIEWS

2

DOWNLOADS

ALTMETRICS

References

Nazuarsyah, U. Muzakir, Mukhroji, R. B. Ginting, and W. Saputra, “Remote IoT Blynk: Suhu dan Penerangan Ruang Laboratorium Keperawatan,” J. Pendidik. Inform. dan Sains, vol. 11, no. 2, pp. 180–188, 2022, doi: 10.31571/saintek.v11i2.4720.

I. Cholissodin, D. Syauqy, D. A. Firmanda, I. Aji, and E. Rahman, “Pengembangan Auto-AI Model Generatif Analisis Kompleksitas Waktu Algoritma untuk Data Multi-Sensor IoT Pada Node-Red Menggunakan Extreme Learning Machine,” J. Teknol. Inf. dan Ilmu Komput., vol. 9, no. 7, pp. 1349–1356, 2022, doi: 10.25126/jtiik.202296738.

Darussalam and A. Goeritno, “Pemanfaatan RFID, Loadcell, dan Sensor Infrared Untuk Miniatur Penukaran Botol Plastik Bekas Darussalam1,” vol. 1, no. 10, pp. 281–291, 2021.

I. U. V Simanjuntak, A. Y. Basuki, and M. Ridlon, “RANCANG BANGUN SISTEM PENGAMANAN PINTU RUMAH TINGGAL MENGGUNAKAN E-KTP DAN MAGNETIC DOOR,” J. Ilm. Teknol. dan Rekayasa, vol. 25, pp. 149–160, 2020.

H. Pratiwia, A. Satyaputrab, and A. Aribowoc, “Purwarupa Sistem Pendataan Pengunjung dan Pengendalian Perangkat Laboratorium Dalam Pengembangan Smart Campus,” vol. 1, no. 1, pp. 50–57, 2017.

A. Lestari and O. Candra, “Sistem Otomasi Pensortiran Barang berbasis Arduino Uno,” vol. 7, no. 1, pp. 27–36, 2021.

L. Suryani et al., “Implementation of Maggot Cage Temperature and Humidity Control Using ESP8266 Based On the Internet of Things,” Rekayasa Sist. dan Teknol. Inf., vol. 5, no. 158, pp. 877–882, 2022.

K. P. Aji, U. Darusalam, N. D. Nathasia, P. Studi, T. Informatika, and U. Nasional, “Perancangan Sistem Presensi Untuk Pegawai Dengan RFID Berbasis IoT Menggunakan NodeMCU ESP8266,” vol. 3, no. 28, pp. 25–32, 2022.

Author Biography

Nazuarsyah Nazuarsyah, Universitas Bina Bangsa Getsempena

Program Studi Ilmu komputer